GE 5337137-8 Mega Switch
GE 5337137-3 Mega Switch
GE 5337137
GE MRI APS Board 2294300-4 with IT Board
GE MRI UNNS3 2366218-2
GE 5127452-3 VRE ICN
GE 5127452-3 ICN VRE
GE 5911000-5 -6 -7VRE ICN
GE 5127452 VRE ICN
Ipass 4x-8x GE 616003 MRI ICN
Supermicro H8DAR-T V2.01 Mainboard VRE ICN
GE 2294300-23 AGP APS
GE 5337137-8 Mega Switch
GE 5337137-3 Mega Switch
GE 5337137
GE MRI APS Board 2294300-4 with IT Board
GE MRI UNNS3 2366218-2
GE 5127452-3 VRE ICN
GE 5127452-3 ICN VRE
GE 5911000-5 -6 -7VRE ICN
GE 5127452 VRE ICN
Ipass 4x-8x GE 616003 MRI ICN
Supermicro H8DAR-T V2.01 Mainboard VRE ICN
GE 2294300-23 AGP APS
After more than ten years of development, MR.Zhou studio has established a repair and testing platform based on software V9X-v25.1 for GE MRI parts repair, targeting models such as EXCITER, HD, HDI, HDXT, HDE, BRIVO355/360, 750W, etc., to facilitate the repair and testing of parts sent by customers.
Specifically addressing engineers' pain points, we conducted extensive simulation tests on various issues encountered during computer rebuilding (VRE & ICN), summarizing valuable experience and proposing improvement solutions.
We also conducted extensive simulation tests on the communication principles between various motherboards in the MGD cabinet, including when paired with different software versions. We have developed our own rapid diagnostic methods for TPS failures encountered by engineers.

SYSTEM: 1.5T Signa Twin Excite II (Software Version 11.0M4) PROBLEM/SYMPTO DWI (Zoom mode and whole mode) and fiesta (zoom mode and whole mode) image having visible reticulate or corduroy artifact no matter when using body coil or head coil, other routine image seems normal

SYSTEM: Magnet Monitor ( Version 2.3) Red Hat Linux release 6.1 (Cartman) Kernel Rev. 2.2.12-20

The optional second hard disk failed to be installed on the system. The 1.5T CV/i with Version 9.1 software was configured with a 9GB system hard disk and an optional 18GB hard disk. When attempting to install the second hard disk via the Install guide GUI in the Service desktop, an error message "t......